Keyence SL-C Series Manual do Utilizador descarregar pdf (Página 34)

Chapter 2 Installation and Assembly

2-12

English

ENGLISH

3. Tighten the bolt with the hexagon socket enough to hold them in place.

4. Tighten the bolts with the hexagon sockets with a mounting torque of 7 N•m while holding the

beveled area at the end of the bar (10 mm (0.39") diagonally) in place with a wrench.

5. Then use M3 (r=7) screws to attach the bar brackets to the SL-C unit. Make sure the bar is not

skewed.

6. Use M3 (r=10) screws with standard mounting brackets A, B, and C, as well as with L-shaped

mounting brackets.

7. Install 1 intermediate support bracket (included) onto protection bars when the bar length is longer

than that of OP-42357 (SL-C36H/SL-C18L). For information about how to install the intermediate

support bracket, see "2-8 E-to-E mounting bracket assembly and installation". For information about

the position at which the bracket should be installed,

see “1-4 Dimensional Drawings (Dimensions

by model) (page 1-7)”.

[Bottom]

[TOP] *The bar should be secured

to the bottom in the same way.

Recommended tightening torque:

0.7 N•m

Recommended tightening torque:

7 N•m

* Non standard mounting bracket present or L-shaped mounting bracket: screw length is M3 (r=7).

Standard mounting bracket present or L-shaped mounting bracket: screw length is M3 (r=10).

Number of required protection bar intermediate support brackets and E-to-E mounting brackets

Protection bar Applicable Model

No. of Bar support brackets

Intermediate

Model to protection bar support bracket

OP-42350 SL-C08H None None

OP-42351 SL-C12H None None

OP-42352 SL-C16H/SL-C08L None None

OP-42353 SL-C20H/SL-C10L None None

OP-42354 SL-C24H/SL-C12L None None

OP-42355 SL-C28H/SL-C14L 2 None

OP-42356 SL-C32H/SL-C16L 2 None

OP-42357 SL-C36H/SL-C18L 21

OP-42358 SL-C40H/SL-C20L 21

OP-42359 SL-C44H/SL-C22L 21

OP-42360 SL-C48H/SL-C24L 21

OP-42361 SL-C52H/SL-C26L 21

OP-42362 SL-C56H/SL-C28L 21

OP-42363 SL-C60H/SL-C30L 21

OP-42364 SL-C64H/SL-C32L 21

WARNING

When mounting the SL-C to a machine, use the mounting method shown in this

instruction manual, and make sure the SL-C is securely mounted.

Insufficiently tightened screws or incorrect mounting of the SL-C may cause a

serious accident, such as serious injury or death of the machine operator.

When mounting the models SL-C36H through SL-C64H or SL-C18L through SL-

C32L, be sure to use the intermediate support bracket provided with the accesso-

ries and mount it in the correct location for the SL-C Series.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 53 54

Comentários a estes Manuais

Sem comentários

Keyence SL-C Series Manual do Utilizador Página 34

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Keyence SL-C Series