Keyence LS-Navigator Manual do Utilizador descarregar pdf (Página 48)

LS-Navigator-M-NO5-E

5-16

5-7 Setting RS-232C Communication Conditions

For the LS-7000 series

The following steps describe the different methods for checking each of the communication conditions on the

controller

(1) Baud rate

(2) Parity

(3) Stop bit

(4) Data length

Press the [ENT] key on the controller to switch the display

to [BAUDRATE].

Set the same value for [Baud rate] as displayed on the

controller.

Select among 1200, 2400, 4800, 9600, 19200, 36400,

57600, or 115200 from the pull-down menu.

Press the [FUNC] key on the controller to switch the display

to [PARITY].

Set the same value for [Parity] as displayed on the

controller.

Select among NONE, ODD, or EVEN from the pull-down

menu.

Press the [FUNC] key on the controller to switch the display

to [STOPBIT].

Set the same value for [Stop bit] as displayed on the

controller.

Select between 1 and 2 from the pull-down menu.

Press the [FUNC] key on the controller to switch the display

to [D-LENGTH].

Set the same value for [Data length] as displayed on the

controller.

Select between 7 and 8 from the pull-down menu.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

Sem comentários

Keyence LS-Navigator Manual do Utilizador Página 48