Keyence DL-EP1 Manual do Utilizador descarregar pdf (Página 85)

5-5

Appendix

- EtherNet/IP Compatible Network Unit DL-EP1 User’s Manual (FD-MH) -

5-3

Default Settings

The DL-EP1 can be reset and initialized to the default settings by holding down the

reset switch ( Page 1-4) for three seconds or longer or by using the Identity Object

Reset service ( Page 5-21) for message communication.

The DL-EP1 default settings are as follows:

* Only the BOOTP client function can be used when the IP address is 0.0.0.0. The

IP address must be set to use any other functions.

Setting Item Value after Initialization

Communication speed 10/100 Mbps automatic

IP address setting method BOOTP

IP address

0.0.0.0

Netmask 255.255.255.0

Default gateway 0.0.0.0

Sensor status mask setting

MS LED flashes in red when a sensor error or warning

occurs.

Multicast TTL 1

Multicast assignment method 0 (Automatic)

Number of multicast addresses 32

Multicast address 239.255.0.0

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 119 120

Sem comentários

Keyence DL-EP1 Manual do Utilizador Página 85