Keyence CV-X Series Manual do Utilizador descarregar pdf (Página 4)

KEYENCE CORPORATION. Vision System Division

‐ 4 ‐ www.keyence.com

2. Changing the KV-Series settings

Enter the "Project name", select the "PLC model",

and then press "OK".

A "Confirm unit setting information" dialog appears.

Click "Read unit setting".

In the workspace, click the Ethernet/IP

communication unit or CPU unit that will be

connected to the CV-X100 Series to start "Unit

Editor". Set up the IP Address of the KV Series in

the "Setup unit (2)" tab.

•IP Address: 192.168.0.20

•Subnet Mask: 255.255.255.0

Select "Convert" - "Auto-assign relay/DM" in the

Unit Editor to allocate a device.

When automatically allocated, the bit device is

allocated to B (link relay) and the byte device is

allocated to W (link register).

Click the icon in "Setup unit (2)" to open

"EtherNet/IP settings". Configure the CV-X100

Series and EtherNet/IP communication settings.

•Drag "CV‐X100" from the "Unit list (1)" tab in

"Eth

erNet/IP settings" and drop it into the scan list

to add it.

•In the "Initial adapter settings" screen that is

displ

ayed after start up, enter the CV

‐100 S

eries

IP Ad

dress (192.168.0.10) that was set in the

CV‐X100

Series global settings.

Save the changes and exit the "EtherNet/IP

settings" and Unit Editor.

Select "Device comment edit window" from the

"Display" menu in KV STUDIO.

The "Device comment edit" screen appears.

Click "Details".

The "Register unit device" screen appears.

Confirm that the box for "CV-X100" is checked in

the "Select unit" list, and then click "Register".

Device comments regarding CV‐X100 are

automatically registered.

Start KV STUDIO with the PLC connected to the

computer, and select "New project" from the

"File" menu.

1 2 3 4 5 6 7 8 9 ... 19 20

Comentários a estes Manuais

Sem comentários

Keyence CV-X Series Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Iluminação Keyence CV-X Series