Keyence DL-PD1 Manual do Utilizador descarregar pdf (Página 54)

3-6 DP-V1 Service

3-32

- PROFIBUS DP Compatible Network Unit DL-PD1 User's Manual (GT-70A) -

Executing Communication

*1 The error content of the sensor amplifier can be checked by noting the ON/OFF

state of each bit.

OFF (0): No error; ON (1): Error

More than one error may occur simultaneously. For details of each error, refer to the

GT-70A Series User's Manual.

*2 Details of output status can be checked by noting the ON/OFF state of each bit.

*3 If the judgment value is correct, the parameter range is -199.999 to +199.999.

When the comparator value is over range, "+999.999" is stored.

When the comparator value is under range, "-999.999" is stored.

When the comparator value is invalid, "-999.998" is stored.

When an error occurs, "+1000.000" is stored.

*4 When you use the calculation function and calculation setting is set to other than

standard difference display, a reading error occurs on the expansion unit.

When the calculation setting is set to standard difference display, a reading error

occurs on the main unit.

This parameter can be used only when the detection mode of the sensor amplifier is peak-to-

peak hold. A reading error occurs when the mode is set to other than peak-to-peak hold.

This parameter may be used for judging the outer diameter of cylinders, in order to

read the peak and bottom values during measurement.

When you do not use the calculation function, a reading error occurs.

*7 This parameter cannot be written when the key lock function is used.

*8 This parameter can be written only if the sensor amplifier meets the two conditions:

• The timing type parameter is set to "external timing."

• The input (pink/purple wire) function selection 2 parameter is set to "Change bank

B."

*9 These parameters can be read/written to only the main unit (ID: 01) of sensor amplifiers.

*10 These parameters are available only when the calculation function is used.

192 Group6 Entry count DINT R

193 Product code DINT R

Main unit:=4006

Expansion unit:=4007

194 to

199

Reserved for system

200 Product name 1 *11

DINT/

STRING

R-

Main unit:=”GT-7”

Expansion unit:=”GT-7”

201 Product name 2 *11

DINT/

STRING

R-

Main unit:="1A*/"

Expansion unit:="2A*/"

202 Product name 3 *11

DINT/

STRING

Main unit:="75A*"

Expansion unit:="76A*"

203 Product name 4 *11

DINT/

STRING

Main unit:=""

Expansion unit:=""

204 to

217

Reserved for system

218 Unit

219 to

223

Reserved for system

Index

(DEC)

Function name

Description

Data

type

Attribute

Default

value

Value

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 67 68

Comentários a estes Manuais

Sem comentários

Keyence DL-PD1 Manual do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Keyence DL-PD1