Keyence FS-N10 Series Manual do Utilizador descarregar pdf (Página 6)

Specifications

*1 Use a cable length of 30 m or less for M8 connector and e-CON connector types.

*2 Counted as 1 output when connecting with the network unit NU Series.

*3 FS-N11MN only

*4 SUPER : 1.2 ms, ULTRA : 1.8ms, MEGA : 4.2 ms

*5 Input time is 25 ms (ON)/25 ms (OFF) only when external calibration input is selected.

*6 Increases 100 mW (4.0 mA) for High Speed mode

*7 One or two more units connected: -20 to +55°C; 3 to 10 more units connected: -20 to +50°C; 11 to 16 more units connected: -20 to +45°C. When using 2-outputs, one unit is counted as two units.

All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting.

WARRANTIES AND DISCLAIMERS

(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a

period of one (1) year from the date of shipment. If any models or samples were shown to

Buyer, such models or samples were used merely to illustrate the general type and quality

of the Products and not to represent that the Products would necessarily conform to said

models or samples. Any Products found to be defective must be shipped to KEYENCE with

all shipping costs paid by Buyer or offered to KEYENCE for inspection and examination.

Upon examination by KEYENCE, KEYENCE, at its sole option, will refund the purchase

price of, or repair or replace at no charge any Products found to be defective. This warranty

does not apply to any defects resulting from any action of Buyer, including but not limited to

improper installation, improper interfacing, improper repair, unauthorized modification,

misapplication and mishandling, such as exposure to excessive current, heat, coldness,

moisture, vibration or outdoors air. Components which wear are not warranted.

(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are only

suggestions, and it is Buyer's responsibility to ascertain the fitness of the Products for

Buyer’s intended use. KEYENCE will not be responsible for any damages that may result

from the use of the Products.

(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be used

internally in humans, for human transportation, as safety devices or fail-safe systems,

unless their written specifications state otherwise. Should any Products/Samples be used in

such a manner or misused in any way, KEYENCE assumes no responsibility, and

additionally Buyer will indemnify KEYENCE and hold KEYENCE harmless from any liability

or damage whatsoever arising out of any misuse of the Products/Samples.

(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED

WITH NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND

STATUTORY WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-

INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED.

IN NO EVENT SHALL KEYENCE AND ITS A FFILIATED ENTITIES BE LIABLE TO ANY

PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL

OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY

DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF

INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF

SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR

TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION

WITH THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE

OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTY’S

CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some

jurisdictions, some of the foregoing warranty disclaimers or damage limitations may

not apply.

BUYER'S TRANSFER OBLIGATIONS:

If the Products/Samples purchased by Buyer are to be resold or delivered to a third party,

Buyer must provide such third party with a copy of this document, all specifications,

manuals, catalogs, leaflets and written information provided to Buyer pertaining to the

Products/Samples.

E 1110-2

Type Standard 1 output High functionality 2 output

Monitor output

0-line

Cable/M8 connector

Cable

M8 connector

e-CON connector

Cable

M8 connector

Cable -

Main unit/expansion unit

Main unit

Expansion unit

(with output cable)

Main unit

Expansion unit

(with output cable)

Main unit

Expansion unit

(with output cable)

Main unit

Expansion unit

(with output cable)

Main unit

Expansion unit

(with output cable)

Main unit

Expansion unit

(without output cable)

Model NPN FS-N11N FS-N12N FS-N11CN FS-N12CN FS-N11EN FS-N12EN FS-N13N FS-N14N - - FS-N11MN

FS-N10

PNP FS-N11P FS-N12P FS-N11CP FS-N12CP - - FS-N13P FS-N14P FS-N13CP FS-N14CP -

Control output

1 output 1 output 1 output 1 output 1 output 1 output 2 output 2 output 2 output 2 output 1 output

N/A

Monitor output (1 to 5 V)----------1 output-

External input - - 1 input 1 input 1 input 1 input 1 input 1 input - - - -

Light source LED Red 4-element LED (wavelength 630 nm)

Response time

50 μs (HIGH SPEED)/250 μs (FINE)/500 μs (TURBO)/1 ms (SUPER)/4 ms (ULTRA)/16 ms (MEGA)

Output toggle Light-ON/dark-ON toggle

Timer function Timer OFF, OFF delay, ON delay, One-shot

Control

output

NPN output NPN open collector 24 V; 1 output max: 100 mA or less; 2 output total:

100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less

PNP output PNP open collector 24 V; 1 output max: 100 mA or less; 2 output total:

100 mA or less (used stand-alone)/20 mA or less (multiple connections); residual voltage 1 V or less

Monitor output

1 to 5 V voltage output; load resistance 10 kΩ or more; repeat precision ± 0.5% of F.S.; 1 ms response time (HIGH SPEED, FINE, TURBO)

External input

input time 2 ms (ON)/20 ms (OFF) or more

Expansion Units Up to 16 units can be connected (total of 17 units including the main unit). Note that the two-output type is counted as two units.

Protection circuit Protection against reverse power connection, output overcurrent, and output surge

Number of interference

prevention units

0 for HIGH SPEED; 4 for FINE; 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.)

Rating

Power voltage

12 to 24 V DC ± 10% ripple (P-P) 10% or less

NPN

Normal:900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)

Eco on mode:800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)

Eco Full mode:470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V)

PNP

Normal : 950 mW or less (39 mA max. at 24 V, 52 mA max. at 12 V)

Eco on mode : 850 mW or less (35 mA max. at 24 V, 44 mA max. at 12 V)

Eco Full mode : 520 mW or less (21 mA max. at 24 V, 26 mA max. at 12 V)

Normal : 1050 mW or less (42 mA max. at 24 V,

56 mA max. at 12 V)

Eco on mode : 950 mW or less (38 mA max. at 24 V,

47 mA max. at 12 V)

Eco Full mode : 600 mW or less (24 mA max. at 24 V,

29 mA max. at 12 V)

Environme

ntal

resistance

Operating ambient

luminance

Incandescent lamp: 20,000 lx or less; Sunlight: 30,000 lx or less

Operating ambient

temperature

-20 to +55 °C (no freezing)

Operating ambient

humidity

35 to 85% RH (no condensation)

Vibration

resistance

10 to 55 Hz Compound amplitude 1.5 mm, 2 hours for each of X,Y,Z axis

Shock resistance

500 m/s

3 times for each of X,Y,Z axis

Case material Both main unit and expansion unit housing material: Polycarbonate

Case dimensions H30.3mm x W9.8mm x L71.8mm

Weight Approx 75g Approx 45g Approx 22g Approx 22g Approx 22g Approx 22g Approx 80g Approx 70g Approx 22g Approx 22g Approx 75g Approx 20g

11513E 1120-1 96M11513 Printed in Japan

1 2 3 4 5 6

Comentários a estes Manuais

Sem comentários

Keyence FS-N10 Series Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Keyence FS-N10 Series