Keyence DL-CL1 Manual do Utilizador descarregar pdf (Página 42)

3-2 Device Maps

3-14

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-S) -

Communicating with the FD-S series

Number [n] denotes the first relay number assigned to the DL-CL1.

*1 See "Entering an External Input into a Sensor Amplifier" (page 3-17).

*2 See "Reading/Writing Settings or Status of a Sensor Amplifier" (page 3-21).

See "Issuing a Motion Command to a Sensor Amplifier" (page 3-20).

*3 See "Rewriting a Setting Value of a Sensor Amplifier" (page 3-21).

 Remote Register RWr (DL-CL1 -> Master Station)

Operating

mode

Device no.

(HEX)

Name

Communication

method

Description Reading range

Monitor mode 2

Full mode 1

Full mode 2

RWr[n] + 00 Error code -

Stores an error code when error state (RX[n]

+ 0F) turns ON.

RWr[n] + 01

Command

response

Used when communicating under handshake

control program.

Stores details of command execution result.

RWr[n] + 02

to 03

(2 words)

Read data *2

Used when communicating under handshake

control program.

Stores the parameter data read from the

sensor ampliﬁ er.

The data type

depends on the

parameter type.

RWr[n] + 04

Integration reset

input response

Stores the integration reset input response of

the sensor ampliﬁ er.

The response is output by assigning sensor

ampliﬁ ers (ID 01 to ID 04) to bits 0 - 3.

0: Input OFF

1: Input ON

RWr[n] + 05

Flow rate hold

reset input

response

Stores the ﬂ ow rate hold reset input response

of the sensor ampliﬁ er.

The response is output by assigning sensor

ampliﬁ ers (ID 01 to ID 04) to bits 0 - 3.

0: Input OFF

1: Input ON

RWr[n] + 06

Zero adjustment

input response

Stores the zero adjustment input response of

the sensor ampliﬁ er.

The response is output by assigning sensor

ampliﬁ ers (ID 01 to ID 04) to bits 0 - 3.

0: Input OFF

1: Input ON

RWr[n] + 07

Temperature

hold reset input

response

Stores the temperature hold reset input

response of the sensor ampliﬁ er

The response is output by assigning sensor

ampliﬁ ers (ID 01 to ID 04) to bits 0 - 3.

0: Input OFF

1: Input ON

RWr[n] + 08 (Not used) - - -

RWr[n] + 09

Current value

"invalid"

If the instantaneous ﬂ ow rate values for

sensor ampliﬁ ers (ID 01 to ID 04) are invalid

(-----), they are output by assigning them to

bits 0 - 3.

0: Normal value

1: Invalid

RWr[n] + 0A

Current value

"over"

If the instantaneous ﬂ ow rate values for

sensor ampliﬁ ers (ID 01 to ID 04) are

"over"(FFFF), they are output by assigning

them to bits 0 - 3.

0: Normal value

1: Over

RWr[n] + 0B

Current value

"under"

*3 Not used with the FD-S series. -

RWr[n] +0C

to 0D

(INT32)

Current Value ID

Used for reading the instantaneous ﬂ ow rate

value.

Outputs the instantaneous ﬂ ow rate value of

the sensor ampliﬁ er (ID 01).

INT32 (LITTLE)

Wr[n] +0E

to 0F

(INT3

Current Value ID

Used for reading the instantaneous ﬂ ow rate

value.

Outputs the instantaneous ﬂ ow rate value of

the sensor ampliﬁ er (ID 02).

INT32 (LITTLE)

RWr[n] +10

to 11

(INT32)

Current Value ID

Used for reading the instantaneous ﬂ ow rate

value.

Outputs the instantaneous ﬂ ow rate value of

the sensor ampliﬁ er (ID 03).

INT32 (LITTLE)

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 73 74

Comentários a estes Manuais

Sem comentários

Keyence DL-CL1 Manual do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Keyence DL-CL1