Keyence EX-V Series Manual do Utilizador descarregar pdf (Página 72)

Chapter 4 Use of Data Processing Functions

■ Sampling period

Specify the length of the sampling period after the hold-reset input.

• The sampling delay time and sampling period are specified with time length.

The unit of the setting display is "ms".

Example

1000.1 = 1000.1 ms

Note 1: The reset delay and sampling delay can be specified within the range of

0.0 to 19999.9 ms.

Note 2: When "b-1" is selected as the measurement type, only "[-11" is displayed

to be set.

Note 3: When "b-2" is selected as the measurement type, only "[-0" is displayed

to be set.

Setting function "["

1. Press the key for at least 2 seconds.

The sensor enters the common function selection mode.

2. Press the

key to make function "[" flash.

3. Press the

or key to select the function setting mode.

4. Press the

key to select the desired function.

When "[-0" is selected

5. Press the key.

The sensor saves the setting and returns to the measurement state.

Trigger point

Starting point

The measured value is

displayed/output at this point.

(Time)

Sampling

delay time

Sampling period

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 119 120

Lao 20 Nov 2024 | 23:59:11

Keyence EX-V Series Manual do Utilizador Página 72