Keyence DL-RB1A Manual do Utilizador descarregar pdf (Página 16)

Mounting and Connecting the DL-RB1A

2-1 Connecting the Unit to Sensor Amplifiers

 Connecting the DL-RB1A to panel mounted sensor amplifiers

1 Connect DL-RB1A to the sensor amplifiers using the optional expansion cable (OP-35361).

Remove the sensor amplifier connector with pliers (for DIN rail mounting) from the DL-RB1A unit when

using with panel mounted sensor amplifies and install the expansion connector cover supplied with the unit.

 Connecting to a large display type sensor amplifier

1 Connect the sensor amplifier to the BCD Output Unit DL-RB1A using the optional expansion cable

(OP-35361).

2 Detach the sensor amplifier connector (for DIN rail mount type) of the BCD Output Unit

DL-RB1A with pliers and mount the attached expansion connector.

Caution

• Make sure the expansion cable is securely connected while the unit is

turned off. Turning the power on when the cable is not inserted straight or

firmly connected could damage the unit.

• Removing or inserting the cable while the power is on may damage the unit.

Caution

• Turn OFF the power before connecting the expansion cable and connect

securely. Diagonal or otherwise improper insertion may damage the

equipment.

• Inserting or pulling the cable when the power is turned ON may damage

the equipment.

Remove the

protection sticker.

Expansion cable (cable length: 300 mm) (OP-35361)

Sensor amplifier connector

(for DIN rail mounting

of the DL-RB1A)

Expansion connector cover

Detach the

protection sticker

Detach the

protection sticker

Expansion cable (cable length: 300mm)

Sensor amplifier connector

(for DIN rail mount type)

Expansion connector cover

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 39 40

Sem comentários

Keyence DL-RB1A Manual do Utilizador Página 16