Keyence DL-RB1A Manual do Utilizador descarregar pdf (Página 34)

Appendix

4-1 Specifications

Performance specifications

The following table shows the performance specifications for DL-RB1A.

* The number of connectable sensor amplifiers varies depending on the model to be connected.

For details, refer to "Available sensor amplifiers" (page 11).

Item Specifications

Model DL-RB1A

Power supply voltage

20 to 30 VDC, including 10% ripple (P-P). Class2

(supplied from the connected sensor amplifier)

Current consumption 27 mA max.

Number of connected sensor

amplifiers

Varies depending on the model

Indicators Alarm indicator (red), power indicator (green)

I/O terminal 34-pin connector (MIL standard)

Control outputs

BCD output: 4 (1 digit) x 6 digits, code output, strobe output, alarm output

NPN open collector: 40 V, 20 mA max., residual voltage 1 V max.

Positive/negative logic: Switchable

Control inputs

ID selection input: 4 inputs, data request input

Non-voltage input (with contacts, without contacts), input time 2 ms min., short-circuit

current 1 mA

Environmenta

resistance

Surrounding air

temperature

-10 C to +55 C (No freezing)

Relative

humidity

35 to 85% RH (No condensation)

Vibration 10 to 55 Hz, compound amplitude 1.5 mm, 2 hours for each of XYZ axes

Material Main unit housing: polycarbonate

Weight Approx. 46g

Accessories Instruction manual, 2 end units, expansion connector cover, switch protection seal

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 40

Sem comentários

Keyence DL-RB1A Manual do Utilizador Página 34