Keyence Visual KV Series Manual do Utilizador descarregar pdf (Página 320)

100

101

7.7 Non-procedure Mode Programming

KV-300 Series Only

KV-300

KV-10/80

Chapter 7 KV-L2 Serial Interface Module

1-296

5. First relay no. +4

Turns ON when a break signal of approximately 160 msec is transmitted. Automati-

cally turns OFF after transmission is completed. Transmission is enabled while the

first relay no. +3 is OFF.

Use the SET instruction or KEEP instruction to turn the relay ON/OFF.

Assigning data memory addresses

200 DM addresses, including the first DM no., are assigned.

The assigned DM addresses have the following functions.

■ Number of data bytes

The number of bytes in the first DM no. +0 and the first DM no. +100 becomes a

binary value. Write the binary data using the LDA/STA instruction or DW instruction.

■ Text data

Enter the text data in ASCII, by byte per DM. ("00" is entered in the 8 high-order bits

and ASCII code is entered in the 8 low-order bits.)

Write the text data using the LDA/STA instruction or DW instruction.

DM No. Assigned data

First DM No. +0 Number of bytes of text data loaded

+1 to +99 Text data to be received

+100 Number of bytes of text data to be received

+101 to +199 Text data to be transmitted

KVHKA Chap 07_5to10.p65 08.3.11, 11:18 AM296

1 2 ... 315 316 317 318 319 320 321 322 323 324 325 ... 443 444

Comentários a estes Manuais

Sem comentários

Keyence Visual KV Series Manual do Utilizador Página 320

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Keyence Visual KV Series