Keyence Visual KV Series Manual do Utilizador Página 90

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 89
Chapter 2 System Installation
1-66
2
Visual KV
Series
2.1.3 Installation Procedure
This section describes how to attach a connected unit directly to a panel, to a DIN
rail, or to a DIN rail with an expansion unit spacer.
Attaching a unit directly to a panel
Attach the metal fixture for screw tightening to each
KV Series unit using the countersunk-head screws
through the countersunk holes. Mount the fixture
directly to the panel.
Attaching a unit to a DIN rail
Hang an upper claw of a Visual KV Series basic unit
to the upper side of the DIN rail, and press the basic
unit onto the DIN rain until a click sound is heard.
Removing a unit from a DIN rail
Pull a lower claw of a Visual KV Series basic unit
downward from the front direction using a screw-
driver, and then remove the basic unit from the DIN
rail.
Expansion unit spacer
When an expansion unit spacer is attached to a Visual KV Series expansion unit, its
height becomes flush with an AC power type Visual KV Series basic unit.
The procedure to attach a Visual KV Series expansion unit to an expansion unit
spacer is the same as the procedure to attach a Visual KV Series unit to a DIN rail.
Refer to the instruction manual supplied with the Visual KV Series for DIN rail
mounting.
Dimensions for expansion unit spacers
2.1 Installation Environment
42.8
38
28
ø4.0
42.8
45
35
ø4.0
42.8
65
66
25.3 4
55
ø4.0
OP-35342
Spacer for 4-I/O
expansion unit
OP-35343
Spacer for 8-I/O
expansion unit
OP-35344
Spacer for 16-I/O
expansion unit
KVHKA Chap 02.p65 08.3.11, 11:11 AM66
Vista de página 89
1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 443 444

Comentários a estes Manuais

Sem comentários