Keyence DL-CL1 Manual do Utilizador descarregar pdf (Página 48)

3-3 Communication Methods

3-20

- CC-Link Compatible Network Unit DL-CL1 User’s Manual (SK-1000) -

Communicating with the SK-1000 Series

(5) The judgment values of the sensor amplifiers of the specified ID numbers are entered into judgment

value boxes 1 to 3.

If the judgment value is correct, the parameter range is

・ from - 99.999 to 99.999 (SK-050).

If the current value is over range, under range, or invalid, the previous value is retained without

updating the current value. Use the value with the judgment value property.

(6) When the "request to change judgment value page" command is set to 0, the "judgment value page

change complete" parameter flips to 0. If a judgment value page change error occurred, it is cleared (0).

(7) Once the judgment values of the sensor amplifiers are updated, the judgment value boxes are

updated by cyclic transfer.

Monitor mode 2/full mode

When reading judgment values (P.V. values) in monitor mode 2 or full mode, read the

remote registers assigned to the ID numbers of the sensor amplifiers. For details of

remote registers, see "Device Maps" (page 3-4).

When reading judgment values (P.V. values) in monitor mode 1, see "Monitor

mode 1" (page 3-19).

This example illustrates how to read the judgment values from the sensor amplifiers of ID 01, 02, and 03.

(1) When the judgment value of a sensor amplifier is updated, the new judgment value is entered into

remote register RWr.

If the judgment value is correct, the parameter range is

・ from - 99.999 to 99.999 (SK-050).

If the current value is over range, under range, or invalid, the previous value is retained without

updating the current value. Use the value with the judgment value property.

(2) If the judgment value of a sensor amplifier is "invalid," the bit corresponding to the ID number of that

sensor amplifier flips to 1.

(3) If the judgmen

t value of

a sensor amplifier is "over," the bit corresponding to the ID number of that

sensor amplifier flips to 1.

(4) If the judgment value of a sensor amplifier is "under," the bit corresponding to the ID number of that

sensor amplifier flips to 1.

Point

PLC

Sensor amplifier

(2)

Comparator judgment "invalid"

Each bit of RWr09

(3)

Comparator value "over"

Each bit of RWr0A

(4)

Comparator value "under"

Each bit of RWr0B

Comparator value of ID 01 1234 4567 6789

RWr0C

Comparator value of ID 02 2345 5678 7890

RWr0E

Comparator value of ID 03 3456 8901

RWr010

(1)

Comparator value of ID 01 1234 4567 6789

Comparator value of ID 02 2345 5678 7890

Comparator value of ID 03 3456 8901

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 77 78

Comentários a estes Manuais

Sem comentários

Keyence DL-CL1 Manual do Utilizador Página 48

Comentários a estes Manuais

Manuais e produtos relacionados com Sensores Keyence DL-CL1